|
|
|
|
Pressure
Calibrators Hand Held |
Pressure
Calibrators Hand Held
 MicroCal
P palm-top modular system
introduces a new era in pressure calibration standard. Compact,
rugged, accurate, battery powered, CE marked, MicroCal P represent
the ideal equipment for field and laboratory test and calibration
activities. Each instrument consists of a basic electronic
module combined with an easy replaceable pressure module.
The pressure range can be selected according to your application
requirements.
- Pressure
accuracy : ±0.05% of rdg. or ±0.1% of rdg.
- Optional
signal input for 0-30 Volt. and 0-22mA active and passive
loop
- Simultaneous
display of pressure and electrical signal values
- Pressure
range from 0 to 20 bar with replaceable pressure sensor
modules (available 9 different ranges)
- CalpMan
Software to document test and calibration activity
- Pressure
Trx test with direct reading of % error
- 10h autonomy
with rechargeable battery
- Optional
internal memory for data and procedures
- Standard
Pressostat & Leak test procedure
|
|
Signal &
Pressure Calibrators MicroCal PM200 |
|
MicroCal
PM200
High accuracy multifunction Signal & Pressure Calibrators
The high accuracy
Pressure Module is designed to operate together with standard
MicroCal 200/200+
calibrator extending the overall performances to absolute, relative
(gauge) and differential pressure measurements and calibrations.
Microcal PM200 System represents the most advanced, powerful and
versatile portable indicator-simulator available on the market
today for measurements and simulations of : millivolt, volt,
milliampere (active and passive loop), ohm, temperature with thermocouples,
temperature with resistance thermometers, frequency and pulse
and pressure.
In order to make the calibration activity easy the PM200 System
can be specified with an internal single or twin pressure transducers
up to 20 bar and, as an option, with a built-in hand pressure
pump, a volume adjuster for fine control, a ventilation valve
for pressure release and a pressure port. As it is important that
the maximum pressure for the device under test is not exceeded,
a safety LIMITS function may be selected to automatically block
the pumping action at the desired set pressure. Two overpressure
valve are used to protect the internal sensors (active also with
instrument switched off). An external pressure transducer can
be connected for pressure up to 700 bar. The case made in aluminium,
has the front panel extremely rugged and designed to work with
the internal pressure/vacuum hand-pump.
- Pressure
accuracy : ±0.05% of rdg.
- Intelligent
Pressure Module for gauge, differential and absolute pressure
measurement and generation combined with a high accuracy
two-channel multifunction MicroCal 200 calibrator.
- Simultaneous
display of pressure and electrical signal values with 24
Vdc loop power supply (active and passive loop).
- Pressure
range from –0.8 bar to 20 bar with internal sensors
and up to 700 bar with external sensor.
- Internal
pressure/vacuum generation with optional built-in hand pump,
volume adjuster and vent valve for pressure Trx calibration.
- CalpMan
Software to document test and calibration activity.
- Data logger
with memory extension (PCMCIA card) for more than 300000
data record.
- Graphic
LCD display with trend recording capability.
- Pressure
Trx test with direct reading of % error
|
|
