Please click HERE to go to our new website
Infrared,Thermometers,Eurotron

Infrared Thermometers
from Eurotron


Products

  Flue Gas Analyzers
  Flue Gas Analyzer
  UniGas 2000
  UniGas 3000
  UniGas 4000
  Econoline Plus EN
  Greenline Mk II

  Infrared
  Thermometers
  Infrared Thermometers

  IRtec Miniray 100
  
IRtec P500+
  IRtec P800, P1000
  IRtec P1300
  IRtec P1600, P2000

  Multifunction
  Calibrators

  Multifunction Calibrators
  Palmtop Calibrator
  
High Accuracy Calibrator
  Two Channel Calibrator
  Very High Accuracy
  Calibrator


  Multi-Loop
  Controllers

  Multi-Loop Controllers

  Pressure
  Pressure Calibrators
  Pressure Transmitters
  Smart Pressure Transmitter

  Process
  Process Calibrators
  Process Multi-Meters
  Process Simulators

  PLC's
  PLC's

  Valves
  Valve Positioners


 





  Infrared Thermometers from Eurotron

Temperature measurements of a liquid or gaseous compound have been successfully made with thermoelectric or expansion thermometers thanks to the good thermal exchange of the sensor with the fluid. With solid bodies a good thermal exchange is difficult to be obtained and an additional measuring error should be considered.

A direct contact measurement is impractical when the object being measured is moving, it cannot be touched with a thermoelectric sensor because of electrical hazard or of other reasons. A non-contact IR temperature measurement is the only solution to the above application problems. Also other applications benefit because non-contact thermometers do not add or remove heat or disturb the process anyway.

 Process Thermometers

Series IRtec 40, IRtec 80 and IRtec 60 are Eurotron process thermometers. Eurotron has been applying a total modularity concept in design to ensure one instrument exactly suited for each particular application. The modular design also allows an easy add or change of any option directly in the field. It also simplifies troubleshooting, repair and calibration. The modular design also gives substantial benefit in term of scale economy at component level and during assembly procedure. A wide range of components as lens, IR sensors, electronic modules, target sighting systems and accessories, provide more than 200 possible standard instruments to fulfil your application requirement exactly. The three series made by Eurotron, are differentiated by the optical system. IRtec 60 fibre optic thermometers are suggested in applications where the ambient temperature is high or there is no room for installation. IRtec 40/80 series have the widest application possibilities: a large possibility of wavelenght permits to use this thermometers for every applications.

Portable Thermometers   

Eurotron Portable IR Thermometers are the results of the experience in application and technology of Eurotron designers. Eurotron has been applied not only the last IR sensor thecnology but also a new and aggressive look for an accurate and practical use. A large set of accessories are available to permit their use in a wide range of applications. Six different models with different wavelenght are available to assure the most complete temperature ranges.


Infrared Thermometers
from Eurotron


Site Designed and Maintained By Panther Marketing & Design